Planning to upgrade your garage? Whether you’re transforming an older garage in Burbank, updating a home in Glendale, or simply looking for a better garage floor coating in the Los Angeles area, the order you complete each project can make a big difference.
A garage renovation may include new lighting, fresh paint, cabinets, storage systems, and a professional concrete floor coating. Doing these projects in the right order can help prevent damage, reduce unnecessary work, and give your finished garage a cleaner, more professional appearance.
At Pro-Tect Concrete Coating, we specialize in professionally installed Penntek polyurea concrete coating systems for homeowners throughout Los Angeles and the San Fernando Valley.
If a new garage floor is part of your project, here’s the order we recommend.
1. Clear Out the Garage First
Before beginning your garage renovation, remove vehicles, tools, boxes, shelving, and anything else stored in the space.
If you’re replacing existing cabinets, workbenches, or shelving, remove those as well.
Starting with an empty garage makes it easier for electricians, painters, and concrete coating installers to access the entire space. It also gives you an opportunity to inspect the existing concrete for cracks, stains, surface damage, or other issues that may need to be addressed.
Pro Tip: If you’re scheduling a garage floor coating installation, ask your installer how far in advance the garage needs to be completely cleared.
2. Complete Electrical and Lighting Work
If you’re installing LED lighting, additional outlets, an EV charger, a new garage door opener, or other electrical upgrades, complete that work before your new garage floor coating.
Electrical work can involve ladders, drilling, drywall cutting, dust, tools, and debris.
Getting this work out of the way first helps protect your new floor and keeps the concrete clear for proper surface preparation.
Good lighting also makes a huge difference in a finished garage. Bright LED lighting combined with a decorative flake floor coating can make an ordinary garage feel brighter, cleaner, and more finished.
3. Repair and Paint the Walls and Ceiling
Painting should also happen before your garage floor coating installation.
Even experienced painters can create occasional drips, splatter, dust, or overspray. Painting first eliminates the need to protect a newly finished floor while the rest of the garage is being renovated.
Complete drywall repairs, patch holes, repair damaged trim, and paint the walls and ceiling before moving on to the floor.
Once these projects are finished, your garage is ready for the biggest visual transformation.
4. Install a Penntek Polyurea Garage Floor Coating
Now it’s time for the garage floor.
Pro-Tect Concrete Coating installs Penntek concrete coating systems designed to transform ordinary concrete into a durable, attractive, easy-to-maintain finished surface.
Unlike a simple DIY garage floor paint application, a professionally installed coating system starts with proper mechanical surface preparation.
Our installation process includes preparing the concrete with professional equipment, addressing cracks and damaged areas as needed, and installing the coating system to create a strong bond with the properly prepared concrete.
Why Choose a Polyurea Garage Floor Coating?
A professionally installed Penntek polyurea coating system offers several advantages for Southern California garages:
- Durable surface designed for everyday vehicle traffic
- Resistance to stains and common household chemicals
- UV-stable coating system
- Easy-to-clean surface
- Decorative flake finish
- Multiple color options
- Professional concrete preparation
- Fast installation
- Fast return-to-service time
For many residential projects, we can transform a garage floor in as little as one day, depending on the condition of the concrete and project requirements.
That means you can dramatically change the appearance of your garage without dealing with a renovation that takes weeks.
5. Install Garage Cabinets and Storage Last
After your garage floor coating has cured and your installer has cleared the surface for use, install your cabinets, shelving, slatwall, workbench, storage racks, and other finishing touches.
Installing your floor first allows the coating to continue underneath cabinets and storage systems instead of stopping around them.
This creates a more complete finished appearance and gives you greater flexibility if you decide to rearrange your garage in the future.
If you place heavy cabinets or equipment directly on the coating, protective pads or glides can also help prevent unnecessary scratching.
What Is the Best Order for a Garage Remodel?
For most garage renovations in Los Angeles and the San Fernando Valley, we recommend:
- Remove everything from the garage.
- Remove old cabinets and shelving.
- Complete electrical, lighting, and EV charger work.
- Repair drywall and paint the walls and ceiling.
- Prepare and repair the concrete.
- Install your Penntek garage floor coating.
- Allow the coating to cure according to your installer’s instructions.
- Install cabinets, shelving, and storage.
- Move everything back into your newly finished garage.
Following this order helps protect each improvement and gives you the cleanest possible finished result.
Garage Floor Coatings in Los Angeles and the San Fernando Valley
If you’re searching for a garage floor coating company near you, Pro-Tect Concrete Coating provides professional concrete coating installation throughout Los Angeles and surrounding communities.
We serve homeowners in areas including:
Burbank, Glendale, Pasadena, Altadena, Sun Valley, Valley Village, Sylmar, Granada Hills, Mission Hills, and surrounding Los Angeles and San Fernando Valley communities.
Whether you have a standard two-car garage, a larger residential garage, workshop, or another concrete surface, we can help you determine the right coating system for your space.
Polyurea vs. Epoxy Garage Floor Coatings
Many homeowners searching for garage floor coatings start by looking for “epoxy garage floors.”
While epoxy has become a common general term for garage floor coatings, not every professional coating system is traditional epoxy.
Pro-Tect Concrete Coating installs Penntek polyurea coating systems engineered for durability, adhesion, flexibility, UV stability, and fast installation.
If you’re comparing epoxy garage floor coatings with polyurea garage floor coatings, it’s important to look beyond the name of the product.
Proper concrete preparation, professional installation, coating quality, and the complete coating system all play an important role in how your finished garage floor performs.
Can a Garage Floor Really Be Coated in One Day?
In many cases, yes.
Penntek coating systems allow our trained installers to prepare and coat many residential garage floors in as little as one day.
The exact installation time depends on several factors, including:
- Garage size
- Condition of the concrete
- Existing coatings
- Cracks or surface damage
- Moisture conditions
- Required concrete repairs
We inspect the concrete before installation so we can determine the proper preparation and coating process for your garage.
More Than Just Garage Floor Coatings
Pro-Tect Concrete Coating provides professional concrete coating solutions for residential, commercial, and industrial applications.
Our coating systems can be used for a variety of concrete surfaces, including garages, workshops, patios, walkways, commercial spaces, warehouses, and other properly prepared concrete areas.
If you’re searching for concrete coatings in Los Angeles, Burbank, Glendale, Pasadena, or the San Fernando Valley, our team can evaluate your concrete and recommend an appropriate coating solution.
Transform Your Garage With Pro-Tect Concrete Coating
A garage doesn’t have to feel like an unfinished storage space.
New lighting, fresh paint, organized storage, and a professionally installed garage floor coating can transform it into a clean, functional extension of your home.
Pro-Tect Concrete Coating is a Certified Penntek Dealer and Installer serving homeowners and businesses throughout Los Angeles and the San Fernando Valley.
From concrete preparation and repairs to the final decorative coating system, our team handles the installation from start to finish.
Ready to transform your garage?
Contact Pro-Tect Concrete Coating today for a free garage floor coating estimate and see how we can transform your concrete floor in as little as one day.